PETERMANN-TECHNIK shows which top seller products are available for the extended temperature range of -40/+105°C.
In many industrial applications, more and more SMD crystals and SMD oscillators with a temperature range of -40/+105°C are required. SMD crystals are available with a frequency tolerance of ±10ppm at +25°C and a temperature stability of >±50ppm@-40/+105°C. Our high-quality SMD crystals are characterised by very low ageing, very low resistance values for fast and reliable transient response and excellent longevity. Our high-quality SMD oscillators have the standard frequency stability of ±30ppm@-40/+105°C (±20ppm@-40/+105°C optional) and are also characterised by very low jitter values, very low ageing and very low power consumption. With an FIT of <0.9, these oscillators also fulfil the highest customer requirements in terms of longevity.
The following top seller products are recommended by the specialists at PETERMANN-TECHNIK for the temperature range of -40/+105°C:
SMD OSCILLATING CRYSTALS:
SMD02016/4 (ceramic housing 2.0 x 1.6 mm)
SMD02502/4 (ceramic housing 2.5 x 2.0 mm)
SMD03025/4 (ceramic housing 3.2 x 2.5 mm - cheapest SMD quartz)
SMD0503/4 (ceramic housing 5.0 x 3.2 mm available from 8.00 MHz)
HC-49/US-SMD (metal housing 11.05 x 4.7 mm)
M3215A (AEC-Q200) ( ceramic housing 3.2 x 1.5 mm / 32.768 kHz)
SMD OSCILLATORS:
HTLPO (1.00 -137.00 MHz / 2.0 x 1.6 ~ 7.0 x 5.0 / -40/+105 ~ -40/+125°C)
WTLPO (1.00 -137.00 MHz / 2.0 x 1.6 ~ 7.0 x 5.0 / -55/+125°C)
HTLPOP(1.00 -137.00 MHz / 2.0 x 1.6 ~ 7.0 x 5.0 / -40/+105 ~ -40/+125°C)
WTLPOP (1.00 -137.00 MHz / 2.0 x 1.6 ~ 7.0 x 5.0 / -55/+125°C)
If you use other products in the temperature range of -40/+105°C, please contact us. Either by email: info@petermann-technik.de, or let us call you back using the convenient call-back service on our website.
Further information can be found at:
SMART CLOCKING - WHERE IS THE JOURNEY GOING?
